Over the last 6 weeks we have been relocating our businesses and home to the Southern Highlands of NSW, our move it is nearly completed, we are planning on picking/processing orders after 18th August, you can start placing your orders now, orders will be processed in the order that we receive them. Thanks again for your patience ❤️

New Website

Opening Soon

Click Here





Diamond Glaze, dimensional 3d adhesive, 10ml Squeeze Bottle by Judikins - Handy!

Diamond Glaze, dimensional 3d adhesive, 10ml Squeeze Bottle by Judikins - Handy!



♥️ Add to wish list

 A water based dimensional adesive. It is mixable! use directly over artwork for a raised glass like finish. Thin with water for a lacquer like finish. Create your own custom colours by adding a small amount of dye ink. Absolutely the best adhesive for glueing glitter, beads, glass, plastic, and vellum paper.


Q: What size bottles is Diamond Glaze™ available in?

A: Diamond Glaze™ is available in 4 sizes:

           10ml squeeze bottle

  • 2 oz. with long applicator tip.
  • 10 oz. with short applicator tip.
  • 18 oz. refill
Q: How do you use Diamond Glaze™?

A: Diamond Glaze™ is great for application of glitter, beads, charms and other trinkets.

Also, a thin layer of Diamond Glaze ™ is a perfect way to create a glossy layer that enhances and protects your work. It is best when used on thicker paper or stock.

Q: I hear there's a problem with Diamond Glaze™ cracking when it dries? A: A bad batch of Diamond Glaze™ was produced in November 2008. Only 2 and 10 fluid ounce bottles were affected. If you suspect you have a bottle from this batch, check the bottom of your bottle. If there's a colored mark—black, blue, red, or purple, you have the newest batches of Diamond Glaze™ and all is good. If there is only a green mark or no markings, you may have the batch that cracks. | More Info |
Q: Is Diamond Glaze™ permanent?
A: Diamond Glaze™ is water soluble when wet and washes easily with soap and water. When dry it makes a permanent adhesive, difficult to remove. We recommend covering any work surface when using.
Q: Is Diamond Glaze™ acid free?
A: Yes.
Q: Can you mix Diamond Glaze™ with other media?
A: Yes, it mixes well with dye-based inks, watercolor, pearlescent pigments, and pastel chalks.
Q: How long does it take to dry?
A: It depends on the thickness of application. If you apply a thin layer, Diamond Glaze can dry in munutes. A layer that is 1mm thick can take up to 2 to 3 hours to dry depending on the humidity.
Q: How do you get Diamond Glaze™ out of your clothes?
A: That's a tough one. While the glaze is wet, you can wash with soap and water. When it dries, you have a permanent embellishment to your outfit. We are looking for a solvent for cleaning dried Diamond Glaze™, but at this time we recommend soaking in water before it dries.
Q: Does Diamond Glaze™ work well on fabrics or with heat?
A: Diaomnd Glaze™ is not the best for gluing fabrics. It makes thin and delicate fabrics look wet. Because it is a great adhesive it can hold the fabric in place, but unless you can camouflage the area, a different adhesive may be better.
Q: Does Diamond Glaze™ yellow over time?
A: When applied in a thick layer or exposed to prolonged sunlight, it may yellow.
Q: Once dry is Diamond Glaze™ scratch resistant?
A: Diamond Glaze™ is permanent & dries hard, but is not completely scratch resistant.

Q: Is Diamond Glaze™ waterproof?

A: It was designed to be used for cardmaking, and can be very useful in other projects. However, it is water soluable not waterproof.

Q: What do you do about bubbles?

A: There are a variety of reasons why bubbles can occur:

  • Do not shake the bottle. If the bottle has been shaken, bubbles that are generated get trapped. If it sits for a long time, they eventually dissipate.
  • When applying Diamond Glaze™ directly out of the applicator tip, first squeeze a small amount onto a piece of scratch paper. The first amount of Diamond Glaze™ out of the applicator will have air trapped in the tube that can create a series of bubbles. Move over to the project you're working on without letting air back into the tip and continue to apply the Diamond Glaze™
  • If applying Diamond Glaze™ with a paintbrush, it's best to move your brush slowly and in a linear direction. If you move too quickly or in a circular motion, this can generate bubbles. Also, be sure the brush is free of excess water as that will mix inconsistently with the Diamond Glaze™ thus creating bubbles.
  • When you have a series of bubbles you can take a dry paint brush and pop the bubbles.

Q: How does one avoid the ink bleeding when using Diamond Glaze?

| Top |

A: Diamond Glaze is water-soluble. Colored pencils, as well as permanent and alcohol inks should work nicely. Basically anything that is not water-soluable.